The well-known “lining” is a board made of wood, which is often used to decorate the decoration of a home, which also makes it possible to additionally insulate. A very famous material in the decoration of a balcony, sauna, bath. Finishing the room with boards designed for wall cladding is not so difficult.
First. Lining is a building material made of wood, it can change its shape under the influence of the environment. The boards that will be used in this room must be left for a day, at least this is necessary so that the material is used to the environment of the room. There is no need to rush to purchase lining, you first need to thoroughly check each plank very carefully for the presence of a well-dried board, the absence of worms, and the presence of fungus. It is better to buy lumber in time-tested stores, for example, buy lining in the Sam-dom online store with all the necessary product certificates.
Second. The walls need to be prepared for work, make something like a lattice on them, it will be the basis. To do this, you need to fix the bars along the edges, then fix them with special mounting threads. For the correct fixing of the bars, it is necessary to use a level and a plumb line in your work. Using these tools, you get a flat surface on which the remaining bars are then attached. This structure will be the mounting grid. The mounting grid is needed for this, for some reason it is impossible to fix the boards intended for sheathing directly to the wall, or if it is supposed to install additional insulation between the wall and the boards. Insulation is placed between the wall and the mounting grid. Mineral wool can serve as a heater (a heat-insulating building material obtained by processing melts of metallurgical slagging of some rocks into vitreous fiber).
Third. For waterproofing, a vapor barrier is laid on top of the lattice. The vapor barrier is a special film, on the one hand, rough, on the other – smooth. It protects the lining from moisture and removes the process of decay. Apply smooth side to thermal insulation building material.
Fourth. Further, the lining is cut into equal stripes, the height of the room that will be sheathed in advance. After the material is ready to work, it is attached to the wall. You need to be careful when laying boards in butt joints, in the process you will see where to cut what. When the room is completely covered with sheathing, it must be covered with one layer of varnish, allowed to dry completely and another applied.
Fifth. Sheathing with wood material is very simple and does not require much time. Lining in the interior can diversify it and even emphasize.