Before buying a lining, it is necessary to inspect the material so that it does not have defects. Preliminary measurements must be made accurately in order to accurately calculate the amount of material.
Do you want to build a bath with your own hands? In this difficult task, the stroy-banya website will help you, where you will find information about building a bathhouse in stages with your own hands.
First of all, a frame for lining is made. It can be made from smooth bars. To ensure the reliability of the structure, the bars are fixed at the edges. Warming should also be taken care of in advance. The use of a waterproofing film will provide moisture resistance. It should be fastened with a smooth side to the insulation, which is quite suitable for mineral wool. For even walls, not too wide rails are used, they are attached to the wall with nails or screws. The use of glue is not recommended. If the walls of the house or bath are wet, then they must first be lubricated with waterproof putty. If it is supposed to finish uneven walls, then the bars are needed more so that there is room for insulation. The bars are fixed with bolts or screws using a screwdriver.
The lining is installed, starting from the ceiling, and after that they move to the walls. To avoid visible gaps in the corners, special corners are used. Planks can be fastened with nails, clips. There is a lining that has a latch on the inside.
